Thursday, April 25, 2019

Ninja Circle Slider Spinner Card (IC #5)

Hi everyone! :o)

Today I want to share with you this CAS (clean and simple), Ninja Circle Slider Spinner Card. :o)

This is a CIRCLE SLIDER SPINNER CARDI made this Interactive Card (IC) for my Celebrating 30 Days of Pisces 2019 personal challenge. If you want to find out more about it, just follow the link provided. :o)

This is a fifth type of IC I made for my challenge. I did create circle slider spinner card for this challenge, but it was double (here), so I considered it as different interactive card type. :o)

I made 15 different types of interactive cards during Pisces period, which was my personal challenge. I completed my challenge, achieved my goals and had a lot of fun. I wrote a short review about the challenge here.

How I made this card...

To make this card I used a super cute Mama Elephant 'Tiny Ninjas' stamp set. LOVE!!! :o)

I colored a Ninja during Kathy's Racoosin 12th 30 Day Coloring Challenge. You can see all my coloring samples during the challenge here.

stamped the adorable ninja on a watercolor paper and watercolored him using Distress Inks. After drying, I fussy cut the ninja and traced edges with black marker.

stamped one more ninja on a white cardstock paper, colored ninja with black marker and fussy cut him, this time leaving white thin border around him.

glued both images together, the watercolored ninja over the black one. I did this because the watercolor paper I use is very thin and I needed thicker image for my card.

Then I prepared a top folded card base and a white cardstock paper panel, both same size.

I cut two concentric circles on the panel using EK Success Circle Cutter, removed the circle belt and stamped a sentiment in a small circle.

I stamped tiny ninja stars (Shuriken) on the panel and on the small circle and loosely watercolored them with a Distress Ink Hickory Smoke.

For a slider mechanism, I used a plastic button and a plastic letter bead. I glued them together and left aside for an hour. I didn't use any special glue. I used UHU all purpose liquid glue. It works great, there is just some patience required and I have a lot of that. :o)

With all parts ready, I assembled the card. I glued 3-D foams on the panel, glued the panel on the card base and placed the slider mechanism on the card base. I glued 3-D foams on the sentiment circle and glued it on the card base. To center it perfectly, I used that cut out circle belt left from cutting the panel as a guide. :o)

Then I tested if the mechanism is working. I glued the ninja on the slider mechanism, left it dry for an hour and my card was finished. :o)

    I love how my card turned out. Here is a short video. :o)

    Licensed under Creative Commons: By Attribution 3.0

    Card measurements: 95 mm x 127 mm (3 3/4" x 5")

    List of supplies:
    • Mama Elephant 'Tiny Ninjas' stamp set
    • white cardstock paper
    • watercolor paper
    • Ranger's Archival Ink (Jet Black)
    • Tim Holtz's Distress Inks:
      • Tea Dye
      • Hickory Smoke
    • Stabilo Fiber Tip Pen (Marker) 68/46, Black
    • plastic button
    • plastic letter bead
    • UHU liquid glue
    • 3-D foam squares, 5 x 5 x 3 mm
    • acrylic block (102 mm x 102 mm)
    • Fiskars High Precision Personal Paper Trimmer
    • EK Success Circle Cutter
    • Xcut Self Healing Cutting Mat A4
    • bone folder
    • scissors
    • Marabu rounded fine paint brush no. #0
    • water
    • paper towels

    Thank you for stopping by and your kind feedback. Enjoy and smile! :o)




    Thank you so much for taking time to comment on my blog posts! I read and appreciate it.

    Those leaving a comment on this blog do so in the knowledge that their name, link to their profile or blog, as well as comments they leave are visible to all those who visit this blog and thereby consent to the use of that personal information for that specific purpose.

    Blogger itself provides options to all users and commentators to delete comments they left on any blog. This blog is no exception. If you wish to delete your published comment or more of them from my blog, you are free to do so. If any technical difficulty occurs, you should contact Blogger or Google to solve these problems.

    Read my full Data Protection and Privacy Policy Statement .

    Due to a lot of Spam in comments (disturbing content), I switched on comment moderation. None disturbing, violent and offensive comments will be approved by me and published on my blog. It will be deleted immediately. Commentators leaving disturbing comments on my blog will be blocked and reported to the Blogger.

    Related Posts Plugin for WordPress, Blogger...